Bifunctional Pt–Sn/SiO2 catalysts described in the Part I, prepared by co-impregnation varying the Pt and Sn loading and the Sn/Pt ratio, have been tested in the one-pot synthesis of a-campholenic alcohol (naturanol) from a-pinene oxide. The process involves the sequential isomerizationof the substrate into a-campholenic aldehyde and the subsequent hydrogenation of this intermediate to naturanol. In this Part II, a kinetic investigation of the catalytic process is reported.First, the isomerization and hydrogenation steps were studied separately. Results obtained indicate that the role of tin in the Pt–Sn/SiO2 catalysts formulation is crucial, affecting strongly the activity and/or selectivity in both steps. In the isomerization step, the catalytic activity increaseslinearly with tin loading whereas the selectivity to campholenic aldehyde remains essentially unchanged. In the second step, high tin loadingsincrease the selectivity to naturanol but a careful control on the Sn/Pt ratio is necessary to obtain a satisfactory hydrogenation rate, because for Sn/Pt > 1 the catalytic activity falls out dramatically.The overall transformation of a-pinene oxide into naturanol was then investigated. It was found that the isomerization of a-pinene oxide tocampholenic aldehyde is the step limiting the naturanol yield. Moreover, kinetic tests have shown that the ratio between the isomerization andhydrogenation rate is the other critical factor in order to synthesize naturanol in high yield. Optimizing the formulation of the Pt–Sn/SiO2 catalysts, a maximum naturanol yield of about 60% was obtained.

One-pot synthesis of naturanol from a-pinene oxide on bifunctional heterogeneous catalysts. Part II: The reaction

A. DONATO;Maria Grazia MUSOLINO;R. PIETROPAOLO
2007-01-01

Abstract

Bifunctional Pt–Sn/SiO2 catalysts described in the Part I, prepared by co-impregnation varying the Pt and Sn loading and the Sn/Pt ratio, have been tested in the one-pot synthesis of a-campholenic alcohol (naturanol) from a-pinene oxide. The process involves the sequential isomerizationof the substrate into a-campholenic aldehyde and the subsequent hydrogenation of this intermediate to naturanol. In this Part II, a kinetic investigation of the catalytic process is reported.First, the isomerization and hydrogenation steps were studied separately. Results obtained indicate that the role of tin in the Pt–Sn/SiO2 catalysts formulation is crucial, affecting strongly the activity and/or selectivity in both steps. In the isomerization step, the catalytic activity increaseslinearly with tin loading whereas the selectivity to campholenic aldehyde remains essentially unchanged. In the second step, high tin loadingsincrease the selectivity to naturanol but a careful control on the Sn/Pt ratio is necessary to obtain a satisfactory hydrogenation rate, because for Sn/Pt > 1 the catalytic activity falls out dramatically.The overall transformation of a-pinene oxide into naturanol was then investigated. It was found that the isomerization of a-pinene oxide tocampholenic aldehyde is the step limiting the naturanol yield. Moreover, kinetic tests have shown that the ratio between the isomerization andhydrogenation rate is the other critical factor in order to synthesize naturanol in high yield. Optimizing the formulation of the Pt–Sn/SiO2 catalysts, a maximum naturanol yield of about 60% was obtained.
2007
a-Pinene oxide; Naturanol; Isomerization; Hydrogenation; One-pot synthesis; Pt–Sn catalysts
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12318/1034
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
  • ???jsp.display-item.citation.isi??? 14
social impact