Forests in southern Italy are mainly located in mountainous areas, where ground-based extraction is still the most common harvesting technique. In particular, 60% of southern Italy’s forests are on slopes with an angle of inclination between 20–60%. The low level of mechanization in forest operations is due to the difficult site conditions, as well as the small-scale characteristics of both the forest owners and the harvesting contractors. The most common work method uses chainsaws to fell the trees, and animals or farm tractors equipped with winches for bunching and extraction. This study assesses the productivity and cost effectiveness of extraction with a purpose-built John Deere 548H skidder, including a comparison of winch and grapple configurations. The results show that the productivity of skidding depends on distance as well as the condition of the skid trail. The number of trees per cycle and volume of each load also had a clear effect. While large purpose-built skidders represent a significant investment, this study demonstrates that the productivity is very high compared to traditional extraction methods and the resulting extraction costs are very competitive. As such, this study indicates that, over time, southern Italian harvesting operations should invest in purpose-built harvesting systems.

Comparison of Timber Extraction Productivity between Winch and Grapple Skidding: A Case Study in Southern Italian Forests

Proto Andrea Rosario
;
Zimbalatti G
2018

Abstract

Forests in southern Italy are mainly located in mountainous areas, where ground-based extraction is still the most common harvesting technique. In particular, 60% of southern Italy’s forests are on slopes with an angle of inclination between 20–60%. The low level of mechanization in forest operations is due to the difficult site conditions, as well as the small-scale characteristics of both the forest owners and the harvesting contractors. The most common work method uses chainsaws to fell the trees, and animals or farm tractors equipped with winches for bunching and extraction. This study assesses the productivity and cost effectiveness of extraction with a purpose-built John Deere 548H skidder, including a comparison of winch and grapple configurations. The results show that the productivity of skidding depends on distance as well as the condition of the skid trail. The number of trees per cycle and volume of each load also had a clear effect. While large purpose-built skidders represent a significant investment, this study demonstrates that the productivity is very high compared to traditional extraction methods and the resulting extraction costs are very competitive. As such, this study indicates that, over time, southern Italian harvesting operations should invest in purpose-built harvesting systems.
File in questo prodotto:
File Dimensione Formato  
Proto_2018_Forests_Comparison_editor.pdf

accesso aperto

Descrizione: Versione dell'Editore - OPEN ACCESS
Tipologia: Versione Editoriale (PDF)
Licenza: Creative commons
Dimensione 3.44 MB
Formato Adobe PDF
3.44 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/20.500.12318/4648
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 26
  • ???jsp.display-item.citation.isi??? 23
social impact