Concrete cores extracted from the same structural element may show variations in strength resulting from a lack of homogeneity and variations in the grade of compactness. This paper, while accounting for such variability, introduces a new formulation to assess both in situ and the potential characteristic strength of concrete. The first part addresses the Concrete Society report 11 on formulations and the formulation introduced by the author that considers new coefficients that take into account the addition of water to the cement mixer and the influence of excess voidage. The second part describes a case study in that the procedures were applied to an experimental campaign carried out on two series of cores. The visual means method proposed by report 11 is applied for excess voidage assessment to the first series of cores, while a computed axial tomography (CAT) scan allowing a direct estimate of the percentage of voids in different sections is applied to the cores of the second series. Results show noticeable variations in the percentage of voids within the same drilling. Moreover, the proposed formulation can estimate the actual value of both the in situ and potential characteristic strengths of concrete with a reasonable degree of approximation. Finally, a computed axial tomography (CAT) scan leads to extremely precise results, making it possible to evaluate the percentage of voids in different sections of the same core.

In Situ Strength vs. Potential Strength of Concrete: Proposal of a New Procedure for the Assessment of Excess Voidage

Pucinotti, Raffaele
2023-01-01

Abstract

Concrete cores extracted from the same structural element may show variations in strength resulting from a lack of homogeneity and variations in the grade of compactness. This paper, while accounting for such variability, introduces a new formulation to assess both in situ and the potential characteristic strength of concrete. The first part addresses the Concrete Society report 11 on formulations and the formulation introduced by the author that considers new coefficients that take into account the addition of water to the cement mixer and the influence of excess voidage. The second part describes a case study in that the procedures were applied to an experimental campaign carried out on two series of cores. The visual means method proposed by report 11 is applied for excess voidage assessment to the first series of cores, while a computed axial tomography (CAT) scan allowing a direct estimate of the percentage of voids in different sections is applied to the cores of the second series. Results show noticeable variations in the percentage of voids within the same drilling. Moreover, the proposed formulation can estimate the actual value of both the in situ and potential characteristic strengths of concrete with a reasonable degree of approximation. Finally, a computed axial tomography (CAT) scan leads to extremely precise results, making it possible to evaluate the percentage of voids in different sections of the same core.
2023
concrete; compressive strength; drilling; cores; existing buildings; presence of voids; variations in compaction; Computed Axial Tomography scan (CAT scan)
File in questo prodotto:
File Dimensione Formato  
Pucinotti_2023_Applsci_Strength_editor.pdf

accesso aperto

Tipologia: Versione Editoriale (PDF)
Licenza: Creative commons
Dimensione 8.83 MB
Formato Adobe PDF
8.83 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12318/137227
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact