In this paper, we present an analytical study of the impact of light trapping and multilayer antireflection coating (ARC) on the electrical characteristics of n(a-Si:H)/i(a-Si:H)/p(c-Si)/p+(C-Si) heterojunction solar cells with intrinsic thin layer (SHJ). The developed analytical model considers a triangular texture morphology of the solar cell top surface and a double ARC layer. This model serves as a fitness function to optimize the device reliability against the interfacial traps using Grey Wolf optimization approach (GWO). The optimized solar cell reveals a high short circuit current ISC=47.9mA, an open circuit voltage VOC=0.56V, fill factor FF=74.72% and a conversion efficiency improvement in the order of 30% over conventional planar solar cells efficiency. Not only the optimized SHJ solar cell exhibits higher performance in terms of figure of merits, but also shows superior interfacial traps reliability at the amorphous/crystalline interface. This reliability enhancement is due to a better surface texture control and intrinsic thin film layer tuning provided by GWO approach.

Improving the efficiency of a-Si:H/c-Si thin heterojunction solar cells by using both antireflection coating engineering and diffraction grating / Bencherif, H.; Dehimi, L.; Pezzimenti, F.; Della Corte, F. G.. - In: OPTIK. - ISSN 0030-4026. - 182:(2019), pp. 682-693. [10.1016/j.ijleo.2019.01.032]

Improving the efficiency of a-Si:H/c-Si thin heterojunction solar cells by using both antireflection coating engineering and diffraction grating

F. Pezzimenti
Membro del Collaboration Group
;
F. G. Della Corte
Membro del Collaboration Group
2019-01-01

Abstract

In this paper, we present an analytical study of the impact of light trapping and multilayer antireflection coating (ARC) on the electrical characteristics of n(a-Si:H)/i(a-Si:H)/p(c-Si)/p+(C-Si) heterojunction solar cells with intrinsic thin layer (SHJ). The developed analytical model considers a triangular texture morphology of the solar cell top surface and a double ARC layer. This model serves as a fitness function to optimize the device reliability against the interfacial traps using Grey Wolf optimization approach (GWO). The optimized solar cell reveals a high short circuit current ISC=47.9mA, an open circuit voltage VOC=0.56V, fill factor FF=74.72% and a conversion efficiency improvement in the order of 30% over conventional planar solar cells efficiency. Not only the optimized SHJ solar cell exhibits higher performance in terms of figure of merits, but also shows superior interfacial traps reliability at the amorphous/crystalline interface. This reliability enhancement is due to a better surface texture control and intrinsic thin film layer tuning provided by GWO approach.
2019
Antireflection coating, conversion efficiency, surface texture, interfacial defects, GWO approach
File in questo prodotto:
File Dimensione Formato  
Bencherif_2019_Optik_Improving_editor.pdf

non disponibili

Descrizione: Articolo principale
Tipologia: Versione Editoriale (PDF)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 1.34 MB
Formato Adobe PDF
1.34 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Bencherif_2019_Optik_Improving_post.pdf

Open Access dal 19/01/2021

Descrizione: Articolo principale
Tipologia: Documento in Post-print
Licenza: Creative commons
Dimensione 722.6 kB
Formato Adobe PDF
722.6 kB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12318/773
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 52
  • ???jsp.display-item.citation.isi??? 46
social impact